SonicWall firewalls with SAML on the SSL VPN: an exploited flaw can skip your MFA, so update SonicOS
CVE-2026-19868 lets someone with a valid LDAP, RADIUS, or TACACS+ login get around SAML sign-in, and the MFA behind it, on SonicOS SSL VPN. It is on CISA's exploited list. Here is what to check and install.
If your office or agency has a SonicWall Gen7 or Gen8 firewall and your remote users sign in to the SSL VPN through SAML (single sign-on through Microsoft Entra ID, Okta, Google Workspace, or a similar identity provider), update the firewall. SonicWall published advisory SNWLID-2026-0014 on November 6, 2026. It covers seven SonicOS flaws, and one of them, CVE-2026-19868, went into the Cybersecurity and Infrastructure Security Agency’s (CISA) Known Exploited Vulnerabilities (KEV) catalog the same day. CISA’s federal due date is November 20, 2026.
The flaw is in how the SSL VPN enforces SAML. A person who has valid credentials for a different sign-in method configured on the firewall, such as an LDAP (Active Directory), RADIUS, or TACACS+ account, may be able to log in to the VPN without going through SAML at all. Most offices put SAML in front of the VPN to get multi-factor authentication (MFA) from their identity provider, so skipping SAML can mean skipping MFA. A stolen or guessed directory password could then be enough to get onto your network.
SonicWall rates CVE-2026-19868 at CVSS 7.1. SonicWall says it investigated a report indicating potential exploitation and urges customers to upgrade as soon as possible. CISA lists it as exploited.
Who is affected
SonicWall says this flaw only matters if SAML is enabled for SSL VPN logins. If your VPN users sign in with local or LDAP accounts and no SAML profile, CVE-2026-19868 doesn’t apply to you, though the other flaws in the same advisory still do (see below).
Affected firmware, as listed in the advisory:
| Platform | Affected | Fixed |
|---|---|---|
| Gen7 hardware (TZ 270 through TZ 670, NSa 2700 through 6700, NSsp 10700 through 15700) and Gen7 NSv 270/470/870 | 7.3.3-7015 and older | 7.3.4-7013 and higher |
| Gen8 hardware (TZ 80 through TZ 680, NSa 2800 through 5800) and Gen8 NSv XS/S/M/L | 8.2.2-8015 and older | 8.2.3-8015 and higher |
The NSv virtual firewalls are covered on every platform SonicWall lists (ESX, KVM, Hyper-V, AWS, and Azure). Gen6 firewalls aren’t listed in this advisory.
The National Vulnerability Database’s version range for Gen7 differs slightly from SonicWall’s fixed version. Go by SonicWall’s advisory, and when in doubt, install the newest release available for your model.
Check your exposure
- Find every SonicWall. Include firewalls an MSP or vendor installed and NSv instances running in Hyper-V, VMware, or the cloud.
- Check the firmware version. It’s listed under Device > Settings > Firmware and Settings.
- Check whether the SSL VPN uses SAML. In SonicWall’s SAML guide, this is set under SSL VPN > Server Settings, where the authentication type is shown. Menu paths vary a little between firmware versions.
- Check for other authentication servers. Under Device > Users > Settings > Authentication, look for configured LDAP, RADIUS, or TACACS+ servers. Those are the “alternate” methods the flaw relies on.
If SAML is on and any of those other servers are active, treat this as urgent.
Fix it
Download the fixed firmware for your exact model from your MySonicWall account, then follow SonicWall’s manual update steps:
- Go to Device > Settings > Firmware and Settings and click Upload Firmware.
- Accept the prompt to back up your current settings before uploading.
- Upload the new firmware file, then click the Boot icon next to it and choose to boot with your current configuration.
- After the reboot, log back in and confirm the new version is shown.
The firewall restarts during the update, so the internet connection and VPN drop for a few minutes. Schedule it, but don’t wait for a monthly window.
If you can’t update right away
SonicWall’s workaround, added to the advisory on November 9: if SAML is in use and you can’t upgrade, disable or delete every active LDAP, RADIUS, and TACACS+ server configured on the firewall. Each is under Device > Users > Settings > Authentication, in its own Configure section (Configure LDAP, Configure RADIUS, Configure TACACS+).
Before you turn those servers off, find out what else uses them. Admin logins and other user-authentication features sometimes depend on LDAP or RADIUS. Turning them off can lock people out or change what they can reach. Treat it as a short stopgap until you can update.
The rest of the advisory
The same update fixes six other SonicOS flaws. The most serious, rated CVSS 8.8, are two management-interface flaws (CVE-2026-107155 and CVE-2026-107154) that could let a remote attacker perform unauthorized actions under specific conditions. There’s also a pre-login buffer overflow in the SSL VPN service (CVE-2026-82308, CVSS 7.5) that can cause a denial of service, two in the TACACS+ client (CVE-2026-77708 and CVE-2026-77709), and a weak password hashing issue on NSv virtual appliances (CVE-2026-19703). SonicWall’s advisory doesn’t call any of those exploited, but they’re one more reason to update rather than rely on the workaround. Keeping the management interface reachable only from inside your network, never from the internet, limits the first two.
Afterward
- Review VPN logins since early November. Look for SSL VPN sessions that didn’t come through your identity provider, especially for accounts that normally use SAML, and for logins at odd hours or from unfamiliar locations.
- Reset passwords if anything looks off. If you find a suspicious session, reset that account’s directory password and check what it touched.
- Record the date you patched. For CJIS or bank networks, MFA on remote access is a control auditors look at; note the exposure window and fix date, and confirm any reporting obligations with your CJIS Systems Agency (CSA), examiner, or counsel.
For other SonicWall gear, see the earlier SMA1000 alert. For more on keeping VPN MFA solid on a small budget, see Meeting the CJIS MFA requirement.
Sources
- SonicWall PSIRT advisory SNWLID-2026-0014: affected and fixed versions, SAML-only condition, exploitation note, workaround, CVSS scores, revision history
- CISA Known Exploited Vulnerabilities catalog: CVE-2026-19868 entry, added November 6, 2026, due November 20, 2026
- NVD entry for CVE-2026-19868: description, published date, affected configurations
- SonicOS 7 Upgrade Guide: obtaining the latest firmware: downloading firmware from MySonicWall
- SonicOS 7.2 Device Settings: manual firmware update: upload, backup, and boot steps
- SonicOS 7.2 SAML Feature Guide: SAML SSO for remote access: where SAML is set for SSL VPN
From Small Town Sysadmin
Get new guides by email
Plain-English tech tips, scam and security alerts, and fixes for small offices, whether you're the office manager or the IT pro. No spam, and you can unsubscribe anytime.